Version 1.0 Copyright by Indoorcycling Group GmbH 2009
|
www.indoorcycling.com
ENG 14
ASSEMBLY - free standing
2
Zoom
4xA
4xC
8mm Key
1: Remove the wave stand from the packaging
The Wave stand is very heavy! It requires at least two people to remove the stand
from the packaging. Make sure you have a firm grip, and avoid holding the edges
(which may bend). Please verify when unpacking that all of the required parts are
included with the stand. Place the wave stand on the side for easier assembly.
2: Attach the bottom plate and side fins
Place the Wave stand on its side for assembly. (See illustration.) Place the base
plate on the stand and secure the two small fins to the rear by bolting through the
base plate and into the screw posts at the bottom of the stand. Before tightening the
bolts, tap or push the base plate to ensure it is seated firmly against the bottom of the
wave stand.
ENG
h
MyRide V3.0
