25
Specify the Alarm Source in Control Center
The following section outlines the procedure for informing Control
Center about the Rack power supply. Further information is
available in the Control Center help file, available by clicking Help
in the application itself.
To create an alarm source for each of the binary inputs on an
IndigoVision device:
1. In Site Setup view, click the site containing the device in the
Site Explorer. (In this case, the device is the transmitter or
receiver card in Slot 1 of the Rack.)
2. In the main window, click the Alarm Sources tab.
3. Right-click the main window and select New Alarm Source.
Figure 11
Creating a new alarm source
4. Enter a name for the new alarm source, for example, Rack
Power Supply.
5. In the IndigoVision Devices list, select the transmitter or
receiver card in Rack Slot 1.
6. Select the required alarm input on the device.
7. Check Binary Input.
