16
Caution
Ensure that you enter the correct values. Once you change from the
defaults, the camera is no longer configurable by the PC with its current
network settings.
•
Gateway
— This is the appropriate default gateway for
remote network access and is only required if the cameras
are to be accessed from a different subnet.
•
NTP Server Address
— Address of NTP time server (if
available).
•
Ethernet Interface
— Select: 1 - 100Mbps Full-Duplex.
When you have entered the configuration data, click
Submit
to
apply the changes.
Notice
IndigoVision recommends that you make a note of the new IP address
and subnet mask, or label the card with its new details.
5. To configure another card, repeat steps 2-5, using a different IP
address for each card.
Caution
Ensure that no two cards share the same IP address (or that of the PC).
6. When you have configured all your cards, return the PC to its
original settings, or change them as appropriate for your
network.
Caution
Please ensure that each video card’s new IP details do not clash with your
PC’s settings before connecting any cards to your network. Contact your
network administrator if you require further assistance.
If required, you can reset the IP values back to their defaults. See
"Resetting the Rack Card to Factory Defaults" on page 20
.
Using the Serial Port Connection
1. Connect the supplied serial cable to the 10-Channel Rack.
