11
3
I
NSTALLATION AND
C
ONFIGURATION
This chapter contains the following information:
•
"Before You Begin" on page 11
•
"IP Configuration" on page 12
•
"Resetting the Rack Card to Factory Defaults" on page 20
Before You Begin
Before you start installing the 10-Channel Rack, please ensure
that you have the following:
•
A 10-Channel Rack backplane
•
A network switch card
•
At least one transmitter or receiver card
•
A PC with a web browser for configuring the card(s)
•
A power supply unit for the 10-Channel Rack
•
A 19” cabinet and four screws to attach the 10-Channel
Rackto the cabinet
Warning
The power supply connector for the 10-Channel Rack is of the same type
as that for the IndigoVision NVR, however the voltages are different.
Using the wrong power supply to power either the Rack or NVR may
result in damage to the unit and or power supply. Always ensure the
correct power supply is used with the correct device.
The PSU connector for the NVR has a locking screw mechanism,
whereas the PSU for the Rack does not.
