Indian Motorcycle Indian Challenger 2020 Owner'S Manual Download Page 23

Page: 23 / 178

OOPPEERRAATTOORR W

WAARRNNIINNGG//FFUUEELL RREECCOOM

MEENNDDAATTIIOONN

The Operator Warning/Fuel Recommendation safety label

located on the fuel tank.

WARNING

• Read Owner’s Manual and, during use, follow all safety

precautions.

• Always wear an approved helmet, eye protection and protective

clothing.

• If your Owner’s Manual is missing, contact an Indian Motorcycle

dealer for a replacement.

Never overfill fuel tank. Fuel level should not rise into fill neck
funnel. Overfilling may result in degraded performance of engine
and evaporative emission control system.

PREMIUM UNLEADED FUEL RECOMMENDED 91 OCTANE
MINIMUM

SAFETY

Summary of Contents for Indian Challenger 2020


















































































































































































Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands

Indian Motorcycle Indian Challenger 2020, Owner'S Manual

Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands