Indian Motorcycle Indian Challenger 2020 Owner'S Manual Download Page 123

Page: 123 / 178

4. The fluid level should be above the minimum indicator mark

in the sight glass

. Add brake fluid as needed.

Do not overfill.

5. Reinstall the diaphragm, cover and screws.

TORQUE

13 in-lbs (1.4 Nm)

6. Wipe away any fluid spills. Check for signs of brake fluid leaks

around hoses, fittings, reservoir and brake calipers. Check for
deterioration of hoses.

BBRRAAKKEE DDIISSCC IINNSSPPEECCTTIIOONN//CCLLEEAANNIINNGG

CAUTION

Allow brake components to cool before inspecting or performing

maintenance. Failure to do so can result in burn to skin.

1. Inspect brake discs

for nicks, scratches, cracks or other

damage. Inspect the thickness of each brake disc at four or
more locations around the disc. If any disc is worn to the
minimum thickness at the thinnest point, or if a disc is
damaged, see your dealer for replacement.

121

MAINTENANCE

Summary of Contents for Indian Challenger 2020


















































































































































































Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands

Indian Motorcycle Indian Challenger 2020, Owner'S Manual

Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands