Indian Motorcycle Indian Challenger 2020 Owner'S Manual Download Page 125

Page: 125 / 178

FFRROONNTT BBRRAAKKEE PPAADD IINNSSPPEECCTTIIOONN

1. Position the motorcycle on the sidestand with the handlebars

turned to the left.

2. Use an inspection mirror, positioned at the front side of the

caliper, to view the friction material.

RREEAARR BBRRAAKKEE PPAADD IINNSSPPEECCTTIIOONN

1. Position the motorcycle on the sidestand with the handlebars

turned to the left.

2. Use an inspection mirror, positioned at the front side of the

caliper, to view the friction material.

WHHEEEELL IINNSSPPEECCTTIIOONN

Inspect both wheels for cracks or damage and replace damaged
wheels promptly. Do not operate the motorcycle if wheels are
damaged or cracked. See the

INDIAN MOTORCYCLE Service

Manual

or an authorized INDIAN MOTORCYCLE dealer can assist.

WHHEEEELL AALLIIGGNNM

MEENNTT

Inspect rear wheel alignment at regular service intervals,
whenever the rear wheel is removed and when the rear drive belt
is adjusted. Please see your dealer for this service.

123

MAINTENANCE

Summary of Contents for Indian Challenger 2020


















































































































































































Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands

Indian Motorcycle Indian Challenger 2020, Owner'S Manual

Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands