Indian Motorcycle Indian Challenger 2020 Owner'S Manual Download Page 140

Page: 140 / 178

1. Remove the left side cover. See page 127.

2. To release the locking tabs, squeeze the upper and lower cover

clips

and remove the fuse box cover.

3. After replacing a fuse, reinstall the fuse box cover and side

cover.

HHIIGGHH--CCUURRRREENNTT FFUUSSEESS

The JCASE® fuse box

contains the high-current fuses for the

chassis, vehicle control module and anti-lock brake system. This
fuse box is located next to the battery box.

Fuse application and size are provided on a label on the fuse box
cover.

EELLEECCTTRRIICCAALL PPRREECCAAUUTTIIOONNSS

Be aware of the following precautions regarding the electrical
system to avoid disruption of electrical signals and possible
system malfunction.

• DO use ONLY genuine INDIAN MOTORCYCLE parts and

accessories designed for your model, and follow the instructions
provided.

• DO use the accessory power jack provided (if equipped).

138

MAINTENANCE

Summary of Contents for Indian Challenger 2020


















































































































































































Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands

Indian Motorcycle Indian Challenger 2020, Owner'S Manual

Search results

Summary of Contents for Indian Challenger 2020

Reviews:

Related manuals for Indian Challenger 2020

Brands by name

Popular brands