manualshive.com logo in svg

Indian Motorcycle Chief Dark Horse 2020, Owner'S Manual

The Indian Motorcycle Chief Dark Horse 2020 is an iconic cruiser designed for those with a rebellious spirit. For every proud owner of this exceptional machine, our website offers a free download of the Owner's Manual. Take advantage of this valuable resource by visiting manualshive.com for a hassle-free and instant download.

Share
Download
background image

Safe Riding Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 

Follow These General Safe Riding 

Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Motorcycling Has Inherent Risks. . . . . . . . . . 9

Safety and Information Labels . . . . . . . . . . . . . . 18
Safety During Service Procedures. . . . . . . . . 85
Safety Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Safety Symbols and Signal Words . . . . . . . . . . . 4
Seat Heater Switches . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Seat Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 137-138
Seat Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136-137
Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Select Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Service Intervals 

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Shifting Gears. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 

Recommended Shift Points . . . . . . . . . . . . . . . 81

Shifting Gears While Driving . . . . . . . . . . . . . . . 80
Shifting Gears While Stationary . . . . . . . . . . . . 79
Shock Air Pressure Adjustment. . . . . . . . . . . . 116
Side Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Sidestand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Sidestand Lubrication . . . . . . . . . . . . . . . . . . . . . . . . 122
Spark Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Specifications . . . . . . . . . . . . . . . . 165-167, 169-172
Standard Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Starting the Engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Steering Head Inspection . . . . . . . . . . . . . . . . . . . 119
Stopping the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Storage Area Preparation . . . . . . . . . . . . . . . . . . . 161
Storage, Park and Cover. . . . . . . . . . . . . . . . . . . . . 163

Suspension Inspection . . . . . . . . . . . . . . . . . . . . . . . 119
Swing Arm/Rear Axle Inspection . . . . . . . . . 118
Switches . . . . . . . . . . . . . . . . . . . . . 22-23, 25-26, 28-31 

Hazard Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

T

Tachometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Taillight Replacement . . . . . . . . . . . . . . . . . . . . . . . . 142
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Throttle Control Grip . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Throttle Control Inspection . . . . . . . . . . . . . . . . . 121
Tire Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Tire Inflation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Tire Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Tire Pressure Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Tire Pressure Monitoring System . . . . . . . . . . 51
Tire Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Tire Tread Depth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Toggle Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Transporting the Motorcycle . . . . . . . . . . . . . . . . 16
Trigger Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Trip Odometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 154-156
Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Trunk Lock Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Trunk, Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Trunk, Removal (Soft) . . . . . . . . . . . . . . . . . . . . . . . . . 54

U

USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

V

Vehicle Control Module FCC/IC 

Compliance Statement . . . . . . . . . . . . . . . . . . . . . . 16

W

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Washing the Motorcycle. . . . . . . . . . . . . . . . . . . . . 157
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Wheel Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Wheel Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Wheel Spokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Wheels And Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Windshield Adjustment. . . . . . . . . . . . . . . . . . . . . . . 59
Windshield Care. . . . . . . . . . . . . . . . . . . . . . . . . . 59, 158
Windshield Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . 58

190

INDEX

https://www.motorcycle-manual.com/

Summary of Contents for Chief Dark Horse 2020



































































































































































































Reviews:

No comments

Related manuals for Chief Dark Horse 2020

Suzuki DR-Z70 Service Manual preview
DR-Z70
Brand: Suzuki Pages: 199
RDMOTO CF123 Mounting Instructions preview
CF123
Brand: RDMOTO Pages: 2
APRILIA SPORTCITY CUBE 125 Manual preview
SPORTCITY CUBE 125
Brand: APRILIA Pages: 157
HERO Splendor Pro CLASSIC Manual preview
Splendor Pro CLASSIC
Brand: HERO Pages: 56
paladin P4009 Installation And Owner'S Manual preview
P4009
Brand: paladin Pages: 2
Abus GameChanger Instruction Manual preview
GameChanger
Brand: Abus Pages: 18
DYNATEK DDK7-2 Installation Instructions Manual preview
DDK7-2
Brand: DYNATEK Pages: 6
HAUL MASTER 95896 Assembly And Operation Instructions Manual preview
95896
Brand: HAUL MASTER Pages: 8
R&G FI0119BK Fitting Instructions Manual preview
FI0119BK
Brand: R&G Pages: 6
Chicago Electric 91214 Owner'S Manual & Safety Instructions preview
91214
Brand: Chicago Electric Pages: 12
VOR Motori SM 450 Owner'S Manual preview
SM 450
Brand: VOR Motori Pages: 100
Royal Enfield Super Meteor 650 Owner'S Manual preview
Super Meteor 650
Brand: Royal Enfield Pages: 124
Ear Defender TuneUp H33-M24-L15 User Instruction preview
TuneUp H33-M24-L15
Brand: Ear Defender Pages: 64
APRILIA DORSODURO - 2009 Brochure preview
DORSODURO - 2009
Brand: APRILIA Pages: 9
Rockford Fosgate TMS69BL14 Installation & Operation Manual preview
TMS69BL14
Brand: Rockford Fosgate Pages: 8
Rockford Fosgate R1-HD4-9813 Manual preview
R1-HD4-9813
Brand: Rockford Fosgate Pages: 17
Beta MINITRIAL LC Owner'S Manual preview
MINITRIAL LC
Brand: Beta Pages: 54
Abus Yadd I Instruction Manual preview
Yadd I
Brand: Abus Pages: 9

Brands by name

Popular brands

Load more brands