Indian Motorcycle Chief Dark Horse 2020 Owner'S Manual Download Page 61 | Manualshive

Page: 61 / 194

background image

W

WIINNDDSSHHIIEELLDD AADDJJUUSSTTM

MEENNTT ((IIFF EEQQUUIIPPPPEEDD))

Use the windshield switch

q

to adjust windshield height for the

best wind deflection.

•  Press up on the switch to adjust the windshield upward.
•  Press down on the switch to adjust the windshield downward.
•  Double tap up or down on the switch to auto-adjust the

windshield all the way up or down. If the windshield is traveling
and the opposite direction is briefly pressed, the auto travel is
canceled.

W

WIINNDDSSHHIIEELLDD CCAARREE ((IIFF EEQQUUIIPPPPEEDD))

Clean the windshield with a soft cloth and plenty of warm water.
Dry with a soft clean cloth. Remove minor scratches with a high-
quality polishing compound designed for use on polycarbonate
surfaces.

NOTICE

Brake fluid and alcohol will permanently damage the windshield.

Do not use glass cleaners, water or soil repellents, and petroleum

or alcohol based cleaners on the windshield, as these products

can damage the windshield.

M

MIIRRRROORRSS

Your vehicle is equipped with convex mirrors. Objects seen in a
mirror may be closer than they appear. Always adjust mirrors
before riding.

To adjust the mirrors, sit on the motorcycle in the anticipated
riding position. Adjust the mirrors so that you can see a small
portion of your shoulders in each mirror.

BBRRAAKKEESS

The front brake lever activates the front brake calipers. The rear
brake pedal activates the rear brake caliper. For maximum brake
effectiveness, apply the front brake lever and the rear brake pedal
together.

59

INSTRUMENTS, FEATURES AND CONTROLS

https://www.motorcycle-manual.com/

«
...
59
60
61
62
63
...
»

Summary of Contents for Chief Dark Horse 2020



































































































































































































Reviews:

No comments

Related manuals for Chief Dark Horse 2020

Brand: Kappa Pages: 4

Brand: Can-Am Pages: 16

Brand: Can-Am Pages: 254

Brand: MadStad Engineering Pages: 2

Brand: AJP Pages: 191

Brand: Yamaha Pages: 662

SIDE FORCE 445cc

Brand: Mash Pages: 27

Brand: R&G Pages: 22

Brand: R&G Pages: 8

Brand: N-Com Pages: 36

TXT PRO - PART LIST 2010

Brand: GAS GAS Pages: 64

Brand: Sachs Bikes Pages: 71

Brand: KSR Moto Pages: 51

2016 Empulse TT

Brand: Victory Motorcycles Pages: 138

Brand: hepco & becker Pages: 4

Brand: ICON Vehicle Dynamics Pages: 4

Brand: SCHUBERTH Pages: 43

Brand: Aim Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands