Indian Motorcycle Chief Dark Horse 2020, Owner'S Manual

Page: 29 / 194

• Press the top of the switch (STOP)
q
to interrupt the circuits and
stop the engine. The engine should not start or run when the
switch is in the STOP position.
• Press the bottom of the switch (RUN)
w
to complete the circuits
and allow the engine to start and run.
• Press and Release the bottom switch (RUN)
w
to start the
engine.
KKEEYYLLEESSSS IIGGNNIITTIIOONN
SSTTAARRTTIINNGG KKEEYY FFOOBB OOPPEERRAATTIIOONN::
When the electrical system is activated with either the power
switch or the starter switch, the key fob must be within range. If the
key fob is not detected, the security light and/or power switch will
flash. The electrical system will automatically shut down.
The starter motor will not engage during this time. If a key fob is
not available, your personal identification number (PIN) can be
entered using the turn signal switches, or on the Ride Command
display screen (if equipped), to unlock the security system. See
page 151.
DDRRIIVVIINNGG KKEEYY FFOOBB OOPPEERRAATTIIOONN::
After starting the engine, the Vehicle Control Module (VCM) will
verify that the key fob is within range again when shifting from
neutral into gear. The security light may turn on during this check.
The VCM will not search for the key fob again after the vehicle has
moved. If the key fob is lost during riding, the PIN will be needed
to restart the vehicle.
If the key fob is not detected when shifting into gear:
• The horn will sound and the security light and/or power switch
will flash.
• The engine will then turn off.
• The electrical system will then automatically shut down.
27
INSTRUMENTS, FEATURES AND CONTROLS
https://www.motorcycle-manual.com/