Indian Motorcycle Chief Dark Horse 2020, Owner'S Manual

Page: 131 / 194

AANNTTII--LLOOCCKK BBRRAAKKEE SSYYSSTTEEM M ((AABBSS)) TTOONNEE
RRIINNGG//SSEENNSSOORR IINNSSPPEECCTTIIOONN
1. Visually inspect for damaged teeth
q
on the front and rear ABS
tone rings. Inspect for nicks and dents on the face of the teeth.
The teeth edges should be consistent in appearance. If a tone
ring is damaged, see your dealer for replacement as soon as
possible.
2. Inspect for debris adhering to the end of the wheel speed
sensors
w
. If contamination is observed, or if you are unable to
visually inspect, slide a thin towel across the face of the sensor
between the sensor and the tone ring to remove any potential
debris.
W WHHEEEELL SSPPOOKKEESS ((IIFF EEQQUUIIPPPPEEDD))
Inspect both wheels for loose, bent, broken or missing spokes (if
equipped). To identify loose spokes, grasp each spoke and try to
move it side to side or up and down. All spokes should be equally
tight and have the same amount of flex. Tighten loose spokes and
replace bent, broken or missing spokes (see an authorized
dealer).
WARNING
Spokes adjusted or replaced improperly could distort the wheel,
make the motorcycle difficult to handle, and cause loss of control.
W WHHEEEELL IINNSSPPEECCTTIIOONN
Inspect both wheels for cracks or damage and replace damaged
wheels promptly. Do not operate the motorcycle if wheels are
damaged or cracked. See the
INDIAN MOTORCYCLE Service
Manual or an authorized INDIAN MOTORCYCLE dealer can assist.
W WHHEEEELL AALLIIGGNNM MEENNTT
Inspect rear wheel alignment at regular service intervals,
whenever the rear wheel is removed and when the rear drive belt
is adjusted. Please see your dealer for this service.
129
MAINTENANCE
https://www.motorcycle-manual.com/