inbody S10 User Manual Download Page 9

Page: 9 / 68

1. LCD Monitor
Touch-screen LCD. This displays the analysis procedure, messages and results.

2. Electrode Connection Unit
Connects electrode cables into the InBody S10’s internal circuit.

    3. Operational Keypad
      The keypad is divisible into input buttons and function buttons.
      The buttons are used to input data required for body composition analysis, set up the operating environment
       or to print out test results.

4. Control & Connection Unit
Connects to peripherals such as a PC or a printer for data transmission.

❶

Power Switch

Powers the InBody S10 on/off.

❷

Power Input Port

Use to connect the power adapter.

❸

9 Pin Serial Port, Female (RS-232C)

Use to connect optional devices.
SD400(Serial Distributor) provided by InBody is for the connection of several optional devices.

❹

USB Host Port

Use to interface with a USB printer or a USB storage device.

❺

USB Slave Port

Use to connect with a PC.

❶

❷

❸

❹

❺

•

Do not drop any food or liquid on the equipment. It may affect the electrical parts in the equipment or cause damage.

•

Only use the adapter provided by InBody.

Warning

DANGER

NOTE

CAUTION

참 조

주 의

참 고

주 의

•

When you use the adapter cable, insert the adapter cable tightly into the InBody S10.

•

Including the optional equipment, only the peripherals provided by InBody can be connected to the InBody S10.

For any inquiry about peripherals, contact InBody.

Note

S10_manual_ENG_G_220317.indd 9

2022. 3. 23. 오후 4:57

Summary of Contents for S10




































































Search results

Summary of Contents for S10

Reviews:

Related manuals for S10

Brands by name

Popular brands

inbody S10, User Manual

Search results

Summary of Contents for S10

Reviews:

Related manuals for S10

Brands by name

Popular brands