manualshive.com logo in svg

inbody S10, User Manual

Share
Download
inbody S10 User Manual Download Page 56

56

57

        4) Installing and Using the InBody S10 

            

It is recommended to connect the InBody S10 to the IB Battery 120, and then use it while the adapter is

             connected to the IB Battery 120.

           

❶

 Connect the connection cable to InBody S10 and IB Battery 120. 

               The connection cable has connection plugs on both sides, but the sizes are different.  
               Connect the big plug to InBody S10 and the small plug to the side labeled “InBody” on the IB Battery 120. 

       

❷

 Connect the adapter of the InBody S10 to the IB Battery 120.  

               Connect the adapter cable to the side labeled “Adapter” on the IB Battery 120, and connect the power
                cable to the power. 

       

❸

 Once the IB Battery 120 is properly connected, the power cable may be safely removed from the

                InBody S10, and the device may be carried around.  Because the IB Battery 120  is connected, 
               the InBody S10 will not shut off when the cable is removed.

       

❹

 If you do not wish to use it anymore, disconnect the adapter and the InBody S10 from IB Battery 120

                and store the IB Battery 120 after pressing the LED ON button for more than 3 seconds.

S10_manual_ENG_G_220317.indd   56

S10_manual_ENG_G_220317.indd   56

2022. 3. 23.   오후 4:57

2022. 3. 23.   오후 4:57

Summary of Contents for S10





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands