82
The i3 follows the following sequence in execution of Autoload:
Figure 14.2 – Flow Chart for Autoload
14.5 Autorun
This option, when enabled (YES), allows the user to automatically place the I3 into RUN mode after the
Autoload operation or automatic Restore Data operation.
When the Autorun setting is disabled (NO), the I3 remains in the IDLE mode after a Restore Data or
Autoload operation.
%SR164.5 can be set for putting the system into RUN mode automatically, once an Autoload has been
performed or an Automatic Restore has occurred.
