46
1.8 Detecting Sensor/Probe
In the event that that communication problems arise with the probe at the activation of the SONO-DIS handheld
device, or if no probe was connected, or it is intended to exchange the probe during operation, this menu item
should be selected.
After selection of this menu item, the SONO-DIS will again attempt to establish a connection to the connected
probe. If this attempt is successful, the serial number of the probe will appear in the display. Should a connection
not be possible, „No probe detected“ will be generated on the display.
NOTE:
Should no connection to the probe be possible in spite of several attempts, check if the probe is connected
properly. Should this not deliver a positive result, please contact our service department.
1.9 Language
In this menu item, the language of the SONO-DIS handheld device can be selected. English and German can be
set. You can select the desired language by actuating the buttons „Up“
and „Down“
and activate the same
via the button „Measurement“
After activation of the language, the symbol
will appear in the upper right hand corner of the display.
1.10 Auto-Power-Off
In the menu item „Auto-Power-Off“, you can select an automatic shut-down offered in various time periods.
The following shut-off times can be selected:
•
1 Minute
•
2 Minutes
•
5 Minutes
•
10 Minutes
•
20 Minutes
The automatic shut-down function can be deactivated by choosing „-min“.
For this purpose, select the desired shut down time by actuating the buttons „Up“
and „Down“
and
activate the same via the button „Measurement“
.
After activation, the symbol
will appear in the upper right hand corner of the display.
NOTE:
The SONO-DIS will only automatically shut down if no further button is actuated. Any actuation of a button
will start the shut down time again.
1.11 Display Illumination
If required, the background illumination of the display can be individually adjusted. Consequently, this enables the
option to save power and to prolong the operational period.
After the selection of the menu entry, the following screen will be presented on the display:
