E210501X rev.1_ENG
16/11/2021
41
DRYING
COOLING
PROG.
TYPE
°C
Min.
°C
Min.
Machines with payment system
HIGH
TIMED
90
50
40
3
MEDIUM
TIMED
80
50
40
3
LOW
TIMED
70
50
40
3
48. DRYER IN PAID MODE: OPERATION
After selecting the program, the cost for running the program appears on the display.
If the payment system provides for it, as the coins are inserted, the missing value for the purchase of the cycle
is updated on the display.
Only after completing the payment, when the START button is pressed, the cycle is started.
If during the drying phase you want to change the selected program, simply press the corresponding button -
the selection will be automatically updated without the machine stopping.
ATTENTION!
In the case of a change during the execution of the cycle, if the values of the programs are different, the times
in credit will be proportionally modified.
If the porthole is opened during operation, the PAUSE or STOP button is pressed, the machine pauses.
The countdown of credited time continues even during this suspension of the cycle.
ATTENTION!
If the break lasts for more than 5 minutes (modifiable by the installer), the credit is automatically lost.
ATTENTION!
If during the cooling phase the porthole is opened, the cycle is definitively interrupted and ended. No credit is
lost because the payment made is used to purchase only the time of the drying phase, and not that of the cooling
phase.
Please note that during cooling it is not possible to select a program other than the one in progress.
49. THE PROGRAMMING OF DRYING CYCLES
You can make a number of changes to the default data by entering the user menu.
To log in, while the machine is stationary press the menu icon "
:
" at the top right.
The screen appears on the display:
