E210501X rev.1_ENG
16/11/2021
34
For garments dirty with substances such as cooking oil, acetone, alcohol, gasoline, kerosene, stain removers,
turpentine, wax, and substances to remove it: they are washed in hot water with a sufficient amount of detergent
for the complete elimination of these substances.
These fabrics must then be rinsed thoroughly and aired before being inserted into the machine.
ATTENTION!
Items such as foam rubber (latex foam), shower caps, waterproof textile materials, rubber-sided items and
clothes or pillows that have latex foam parts, and in general all fabrics containing rubber parts, should not be
dried in the dryer.
ATTENTION!
Do not dry garments that have not been previously washed.
ATTENTION!
Make sure that softeners and related products have been used in accordance with their instructions.
ATTENTION!
Check garments with padding: do not load the machine with garments whose padding is damaged.
ATTENTION!
Close the zippers; buttoning the closures of the duvet covers; fasten laces and ribbons. Empty your pockets.
ATTENTION!
Metal elements such as buckles, hooks, closures must be wrapped in a cloth before drying, so as to protect the
basket from damage such as scratches or bumps, which could in turn damage the garments.
40. STARTING A DRYING PROGRAM
Turn on the main switch that powers the machine.
ATTENTION!
Before switching on an equipment that has undergone a thermal shock, wait for the evaporation of any
condensed moisture to avoid possible damage to the electronic components.
For machines equipped with steam heating: open the gate to allow the entry of steam. To limit water hammer,
perform the opening operation slowly: from the closed position to the open position, within 1 minute.
For machines equipped with gas heating: open the gas shut-off valve.
Make sure that the emergency mushroom (for models that provide for it) is in the resting position, and that it
has not been activated during transport or before the last shutdown of the machine.
ATTENTION!
Before starting the machine, always perform the safety check procedure (check the relevant paragraph).
Before carrying out the loading with wet linen, make sure that the basket is completely empty and clean.
The machine must be loaded with linen as homogeneous as possible and with a weight that does not exceed
that required by the technical sheet and matriculation label.
After loading the machine, close the porthole.
