E210501X rev.1_ENG
16/11/2021
39
44. END OF WORKING DAY FOR THE DRYER
At the end of the working day, the machine must be brought to the end of the cycle and turned off: the basket
must be emptied and cleaned.
Turn off all power supplies by operating the relevant line switches/disconnectors: electric, gas, steam, and
compressed air.
Finally, leave the porthole open.
If the washing machine part is still in use, wait for the washing cycle to be completed.
45. CHANGING PARAMETERS DURING THE DRYING CYCLE
While the program is in progress you can change all the characteristic parameters: these changes do not remain
in the memory of the program.
To change the program while it is in progress, press the icon of the parameter you want to change and change
its value.
Once the desired changes have been completed, simply do not press any more keys: after a few seconds, the
views return to the normal sequence.
Changes can be made as many times as you want and at each stage of the cycle.
ATTENTION!
Changes to the programs should only be carried out by competent personnel.
46. MANUAL DRYING PROGRAM
It is possible to perform a drying cycle in manual form, setting only the main values of the drying cycle.
To run this program, select the "MANUAL" icon, set the required data and press START.
The data entered remains in memory as default values for the subsequent use of the manual cycle.
During the execution of the cycle, it is possible to modify the parameters, as in the case of standard programs
(see the relative paragraph).
The engine times of the MANUAL cycle are 40 seconds of rotation and 5 seconds of pause.
47. THE DRYING PROGRAMS IN MEMORY
The dryer has in memory thirty programs already configured with all their characteristics.
Below is a table that summarizes them.
See in the relevant paragraph how to modify these default programs to your liking.
The default rotation times for machines equipped with inversion are:
-
clockwise rotation: 40 seconds
-
pause: 5 seconds
-
Counterclockwise rotation: 40 seconds
Rotation and pause times can be rescheduled (see relevant paragraph).
For machines that are equipped with the relevant options, the other default values are the same for all programs:
-
Heating power: level 3
-
Basket speed: 40 rpm
-
Fan speed: speed 2
ATTENTION!
The temperature to be used must comply with the temperatures allowed by the characteristic plates of the linen
to be dried.
ATTENTION!
The formation of yellow stains on the dried fabrics, signals the presence of detergent not carefully eliminated
during rinsing or a temperature of use of the machine higher than that expected for the fabric!
