E210501X rev.1_ENG
16/11/2021
26
The function can be eventually abandoned by tapping the "BACK" icon.
After configuring the desired delay, confirm the set data by tapping the OK icon.
The following screen appears on the display:
Below the delayed start indication appears the countdown that indicates how many hours and minutes are left
to the automatic and delayed start of the program.
The countdown can be interrupted at any time by pressing the "STOP" icon.
When the countdown expires, the cycle will start automatically.
27. RUNNING A WASHING PROGRAM
After selecting the program, as described in the previous paragraphs, the cycle is started by pressing the
"START" icon.
The selected program starts.
In the event that the machine is equipped with a motorized closure, the start of the cycle is characterized by the
locking of the porthole, lasting a few tens of seconds.
During the execution on display the following screen appears:
The display information allows you to understand the operating conditions of the machine, during the execution
of the program.
All parameters can be changed on the run by simply tapping on the corresponding icon. These changes remain
valid only for the current cycle: for updates on the function and for more information, please refer to the online
documentation.
ATTENTION!
In the case of early termination of the cycle remember that the temperature of the tissues may be high!
ATTENTION!
In case of breakdowns or malfunctions, immediately turn off the equipment and call the authorized technical
service center!
