IMDES CREATIVE SOLUTIONS Schulstrasse 21 D-48455 Bad Bentheim /Gildehaus Germany T:+49(0)5924-997337 E:
© 2019
IMDES CREATIVE SOLUTIONS
19
2.2 Programming and modifying the Soldering Profiles
Your
CONDENS- IT
Profiler
reflow soldering machine is from the factory pre-programmed for use with Galden
230
lead-free applications.
If you have ordered the machine for for lead containing solder alloys, the machine is pre-programmed for Galden
200
or Galden
210
.
•
The "default" Preheat heater temperature
is set to:
150 °c (
Galden
230
lead-free applications)
•
Preheat heating "Default Time”
is set to: 30 seconds (Galden
230
lead-free applications)
• "
Default boiling Time” TAL
"Time Above Liquid" is set to: 30 seconds.
• "
Default value"
AntiTomb menu (not activated) and is set to 0 Sec but you can
activate it by changing the time span from 0 Seconds to for example into 30 seconds
•
"Default value"
of the tomb Temp + 200 ° C
(for lead-free application)
"Default value"
of the tomb Temp + 160 ° C
(for leaded applications
2.3 OPERATING & PROGRAMMING THE MACHINE
Power up the Machine by activating the Black Switch on the left side at front of the machine
The
Blue LED
under the main power switch will be
illuminated
now!
On the display appears :
IMDES CREATIVE SOLUITIONS
Copy right Paul Keizer Ver. 1.15
(or an other Ver. = Version release No.)
When pressing the
green key
, the soldering process starts with the last saved profile in Eeprom and starts to
warm up the machine to go through the entire solder and cooling process.
If you want to have a different solder profile.
You need to
press the RED key!
Then appears in the display
Galden boiling point = (boiling point Galden)
PLEASE NOTE!!!
This will be determined by the type of Galden you want to use:
LS 200
Maximum solder temperature 200°C
for lead containing solder alloys
LS 210
Maximum solder temperature 210°C
for lead containing solder alloys
LS 215
Maximum solder temperature 215°C
for lead containing solder alloys
LS 230
Maximum solder temperature 230°C
for lead free solder (SnCuAg)
XS 235
Maximum solder temperature 235°C
for lead free solder (z.B. Sn100C,SnCu)
HS 240
Maximum solder temperature 240°C
for lead free solder (z.B. SnCu)
HS 260
Maximum solder temperature 260°C
for lead free solder (special lead free product)
2.4 Attention
!
If you have entered the new values, you want in the menu, you
must
press
the
green
and
red key
simultaneously
to confirm and entering in to the next menu.
If you
do not want to change anything in a
menu,
you must
also
press
the green
and
red key
simultaneously
to skip and entering into the next menu.
The last saved values in the EEPROM are indicated in the display.
For example:
Gal 230
°
Pht 150
Prof 30s GrB=ok
