Imdes DINO-CONDENS-IT, Owner'S Manual

Page: 14 / 33

IMDES CREATIVE SOLUTIONS Schulstrasse 21 D-48455 Bad Bentheim /Gildehaus Germany T:+49(0)5924-997337 E: info@imdes.de
www.imdes.de SKYPE marc.van Stralen © 2019 IMDES CREATIVE SOLUTIONS
14
1.14 Handling tips
:
Keep the stainless lid with glass observation window vertical above the tank, with a corner down, so the
GALDEN condensate left will flow back, in drops, in the process chamber.

A piece of cleaning paper or kitchen roll is a wonderful resource and should be always kept at hand to wipe
drops right away
.
1.14.1 Handling of the DINO CONDENS-
IT
With the construction of
DINO-CONDENS-
IT
great attention was given to a simple reliable and straightforward
design for ease of handling and low cost of ownership.
1.14.2. General operating instructions
When loading the
product carrier , care should be taken that the maximum dimensions and weight of the PCB or
device are not exceeded.
The PCB/ Device may not stick out over or under the
product carrier.
The
DINO-CONDENS
-IT
stainless steel lid should be opened only to insert or remove a PCB to prevent
unnecessary loss of Galden.
The minimum level of the process medium must be monitored by the operator with the help of the
Dipstick (brass tube
).