EN – Oil Free Silent Air Compressor
046 ‐ LI ‐SP‐EN‐ GENERAL SILENCIOSOS REV 171121
18 / 24
6.‐ INSTALLATION AND LOCATION
Locate the compressor in a clean, dry and well ventilated area. The compressor should be located
in a distance of 30‐40 cm from a wall or any other obstruction that would interfere with the air
flow through the intake air fan.
Place the compressor on a firm level surface.
The compressor is designed with heat dissipation fins that allow a proper cooling. Keep the fins
and any other parts that collect dust or dirt clean.
A clean compressor runs cooler and provides a longer service. Do not place rags, papers or any
other materials on top of the compressor.
7.‐ OPERATING INSTRUCTIONS
For models 04606, 04624 and 04650 to turn the compressor on, pull the bottom of the pressure
switch up, for model 04607 push on/off button and wait until the air fills the air receiver, until
the pressure of the tank is at least 4 atm or it raises the min. pressure of the connected device,
then you can start working. Until then, all drain devices must be closed.
To stop the compressor, push always the bottom of the pressure switch, and then disconnect the
plug from the power supply.
Attention!!
Extension cables with a small section or an improper installation could
cause an incorrect performance of the compressor.
7.1.‐ First start, or after a long time of storage
Open the air outlet, and drain all the air of the tank. Plug the cable into the main supply.
Turn the compressor on by pulling up the button of the pressure switch and leave the compressor
running for at least 20 minutes. Then close the air outlet and work normally.
