imagistics ix3010, Operating Manual

Page: 37 / 158

2.6
Basic operation
12
At the end of the operation, your fax machine beeps and displays:
Important: Whenever you transmit a document, what actually appears on
the top line of the display depends on information stored in the
remote fax. The line may even be blank.
Note: If the call fails, see “Redialing,” page 2.6.
Sending a fax using
MONITOR
/
CALL
key or a handset
You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: If you want to use the
MONITOR
/
CALL
key, you should assign it a Soft key in
advance. (See page 3.16.)
Note: In this function, you cannot send a fax using the
FBS
glass.
1
Insert the document to the
ADF
.
2
Adjust resolution and contrast if necessary.
3
Obtain a dial tone, either by:
• Pressing
MONITOR
/
CALL
… or …
• Lifting the optional handset.
In either case, the
LCD
shows:
4
Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the optional handset to tell that
person that you’re trying to send a fax. When you hear fax tones,
press
START
.
6
If you’re using an optional handset, hang up after pressing
START
.
7
At the end of the operation, your fax machine beeps and displays:
Note: If the call fails and you used
MONITOR
/
CALL
to dial, press
MONITOR
/
CALL
to hang up. Or if you’ve pressed
START
to begin the fax
transmission, press
STOP
to end it.
Also see “Redialing manually,” below, if the call fails.
Redialing
Automatically fax redialing
If your fax call fails, your machine automatically redials it. In this Auto Redial
mode, your fax automatically redials the number up to two times at one minute inter-
vals.
Note: You can change the redial time and interval settings. (See “Changing redial
settings,” page 4.5.)
While in the Auto Redial mode, the machine can continue to receive faxes and can
make as many as 99 fax transmissions.
Note: If you used either the
MONITOR
/
CALL
key or a handset to dial the call, you
must redial manually (see below).
Note: If the last redial attempt fails, your machine may print (and/or display)
error messages.
Redialing manually
You can always redial calls manually. And you must redial manually if you used
either the
MONITOR
/
CALL
key or an optional handset to dial the failed call.
Note: To use the
REDIAL
/
PAUSE
key, you should assign it a Soft key in advance.
(See page 3.16.)
To redial a fax call manually without using the
MONITOR
/
CALL
key or an
optional handset:
1
Set the document and set the resolution and contrast.
2
Press
REDIAL
/
PAUSE
. The
LCD
will show:
View Redial History
0:1234567890
919725552009
** Complete **
** Tel Mode **
919725552009_
** Tel Mode **
_
919725552009
** Complete **