Level one function
Level two function
Level three function
Summary of setting
Default setting
Page
B. User Settings
2.Fax Settings
01.Scan Parameters
You can set the following settings for send fax message.
• Primary resolution mode
Normal
4.1
• Primary contrast mode
Normal
02.Print Parameter
You can set the following settings for receive fax message.
• Reduction rate
Auto
• Reduction margin
40 mm
4.3
• Half-page reception
Off
03.# of Rings
Number of rings before your machine answers.
Two times
4.4
04.Redial
Number of times and interval for automatic fax redialing.
Two times
4.5
One minute
05.Dialing Pause
Dialing pause length.
Two times
4.5
06.Memory Tx
On/Off setting for Memory transmission.
On
4.2
07.Quick Memory Tx
On/Off setting for Quick Memory transmission.
On
4.2
08.TTI Tx
On/Off setting for sending your TTI.
On
4.2
09.ECM Mode
On/Off setting for ECM mode.
On
4.1
10.Block Junk Fax
Reject the fax reception from unauthorized incoming faxes.
Off
3.56
11.Security Rx
Keep all received fax messages in memory and after print them.
Off
3.52
12.Separator Page
Separate each received document.
Off
3.24
13.PIN Mode
Prevent unauthorized long-distance calls.
Off
3.54
14.Passcode
Enter passcode for limiting polling access.
—
3.15
15.Rotate Rx
On/Off setting for Rotate reception.
Off
4.4
16.DRD
Set the ring pattern to use with phone company’s Distinctive Ring
Off
3.26
service.
16.Remote Copy
Archive the document transmitted and/or received.
Off
3.20
3.Copy Settings
01.Scan Parameters
You can set the following settings for copying.
• Primary document type
Text
4.6
• Primary contrast mode
Normal
02. Print parameter
You can set the margin for copying.
24 mm
4.6
03.Auto Reset Time
Set the time (minutes) of resetting the copy parameters.
3 minutes
4.7
04.Copy Auto
Set the default setting to “Auto” for one of the following:
Paper size
4.7
• Paper size • Reduce/Enlarge ratio • Document size
05.Copy Protect
On/Off setting for Copy protection.
Off
2.18
06.Sort Copy
On/Off setting for Sorting copy.
On
4.7
07.Nega/Posi
On/Off setting to reverse copy of black and white areas.
Off
2.17, 4.7
08.Combine
On/Off setting to combine.
Off
2.17, 4.8
4.Printer Settings
01.TCP/IP*
3
Enter the IP Address, Subnet mask and Gate way address.
—
—
1.15
Getting started
*3: This option appears only if the optional NIC (network interface card) has been installed.
Summary of Contents for ix3010
