DA-DHR/DH/DSR/DS/HR/H6802
+
Installation and Operation Manual
3
Chapter 1: Introduction
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
•
Re-lockable for DVB-ASI signal
•
Reclock status and rate report by LEDs
•
Reclocking Bypass mode is selectable as automatic or enforced
•
Card-edge control by jumpers with LED display
•
Remote control via RS-232 or Ethernet
DA-
•
Configurable as a single channel of one input and eight outputs
(1×8), or two independent channels of one input and four outputs
•
Enable automatic switching input between input 1 and input 2 in the
l×8 configuration when a loss of the input signal is detected
•
Input signal presence detect and report
•
Automatic input cable equalization
•
Maximum equalized cable length adjustable (for 270 Mb/s and
remotely only)
•
Directly fan out the input signal (5 Mb/s to 3 Gb/s) without
reclocking
•
Card-edge control by jumpers with LED display
•
Remote control via RS-232 or Ethernet
DA-
•
Configurable as a single channel of one input and eight outputs
(1×8), or two independent channels of one input and four outputs
•
Enable automatic switching input between input 1 and input 2 in the
l×8 configuration when a loss of the input signal is detected
•
Input signal presence detect and report
•
Automatic input cable equalization
•
Maximum equalized cable length adjustable (remotely only)
•
Reclocking Mode selectable as automatic or manual
•
Re-lockable for 270 Mb/s SMPTE signal
•
Re-lockable for DVB-ASI signal
•
Reclock status and rate report by LEDs
•
Reclocking Bypass mode is selectable as automatic or enforced
•
Card-edge control by jumpers with LED display
•
Remote control via RS-232 or Ethernet
DA-
•
Configurable as a single channel of one input and eight outputs
(1×8), or two independent channels of one input and four outputs