Infocaster Manager™ NM3200
Hardware Manual
Get Started
© 2014 Imagine Communications.
Proprietary and Confidential.
6/9/2014 | Page 18
Chassis Components Installation
This section describes important safety guidelines for proper chassis installation, tools needed for
installation, how to access chassis components, and chassis installation instructions.
Important Safety Guidelines
To avoid personal injury and property damage, please read all the information provided in Safety
Guidelines (on page 8), and carefully follow all the safety steps listed in this chapter before accessing or
servicing your system or its components.
Safety Steps
CAUTION
This product shall only be accessed and serviced by technically
qualified personnel or technicians.
Before accessing the chassis
1.
Turn off all peripheral devices and the power supply connected to the system.
2.
Unplug all power cords from the system or wall outlets.
3.
Disconnect all the cables and label the cables for easy identification.
4.
Use a grounded wrist strap designed to prevent static discharge when handling components.
Remove the Chassis Covers
After completing the above steps, you can remove the chassis covers and install components and
devices into the chassis as described in this chapter.
1.
Unlock and remove the screws and fasteners to remove the covers or components.
2.
Save all the screws and fasteners for later use. (If necessary, label the screws and fasteners for easy
identification.)
3.
Follow the instructions given in this chapter to remove the chassis covers.
Installation Tools
You will need the following tools for the safe and proper installation of your system.
Phillips Screw Driver
Anti-static Strap