Infocaster Manager™ NM3200
Hardware Manual
Introduction
© 2014 Imagine Communications.
Proprietary and Confidential.
6/9/2014 | Page 15
Port
Description
USB 1-4
4-pin Universal Serial Bus (USB) ports to connect USB 2.0 devices.
PS/2 Mouse
Connects a PS/2 mouse.
PS/2 Keyboard
Connects a PS/2 keyboard.
COM
Connects a 9-pin serial supported device.
VGA
Connects a VGA monitor.
LAN (RJ-45) 1 & 2
Two Ethernet ports enable Gigabit connections to a Local Area
Network (LAN) through a network hub. See the following table for
LAN port LED descriptions.
IPMI
Intelligent Platform Management Interface port.
LAN Port LEDs
The following table describes the status of the LAN LEDs. The left LED indicates the network connection
activity. The right LED indicates the connection speed.
LAN LED Descriptions
Activity LED Status
(left side)
Description
Speed LED Status
(right side)
Description
Off
No Link
Off
10 Mbps
On
Linked
Green
100 Mbps
Blink
Data Activity Yellow
1 Gbps
Power Supply Modules
There are three power supply modules connected to your system. If there is a failure with one of the
modules, an alarm sounds. It is essential that all three power supply modules be connected at all times,
therefore it is recommended that the failed module be replaced immediately to avoid possible damage
to your system due to loss of power.
Note:
For extra insurance against power loss, you may wish to connect the three power supply modules
to AC outlets on different circuit breakers.
Power Module LED Descriptions
Color Condition
Description
Green
Power Supply DC On
Amber
Power Supply Standby
Off
No AC Power to the System
