Recovery
108
Recover the HD/SSD to Factory Default
In a Scan2Net® scanner, an image of the Scan2Net Linux operating system
is stored on the Recovery Partition at certain times. The image is generated
at the time of manufacturing, and also any time an HD/SSD needed to be
replaced.
Preparations to Recover an HD/SSD
➢
Make sure that you know the scanner’s IP address, subnet and gateway
valid for the network or have the network administrator available.
➢
Login to the Image Access Customer Service Portal at
http://portal.imageaccess.de and obtain the latest firmware for your
device.
Step Action
1
If still possible, shut down the scanner, either through the touch
panel or through the currently used application or by pushing the
start button on the scanner’s housing.
Otherwise, switch off the scanner at its main power switch.
Recovery Process
Make sure that the following process is not interrupted by a hard shut
down or power failures.
If this process is interrupted, a loss of the recovery partition is
possible, making it mandatory to physically replace the HD/SSD.
The following process cannot be influenced by the user.
Summary of Contents for Bookeye 4 V1A Professional
