LED-CMH-HPS-MH
Toll Free: 1-877-540-5588
iluminarlighting.com
© Copyright 2021 ILUMINAR Lighting
Subject to change without notice.
ZONE 1 (60 LIGHTS)
ZONE 2 (60 LIGHTS)
Length
Width
Height
Weight
Physical Specifications
107mm
74mm
31mm
0.5kg
4.21"
2.91"
1.22"
1.1lb
The ILUMINAR Touch+ Controller will now allow you to
control up to 60 lights per zone or room, with two
channels you can control up to a total of 120 lights.
This will take even your beginner garden to the
commercial level, all of these features packed into the
ILUMINAR Touch+ Controller.
Dimming Range
Total Number of Fixtures per Controller
Maximum Quanity of Fixtures per Zone
Maximum Cord Distance per Zone
Maximum Output Power per Zone
Maximum Control Voltage
Input Power
Operating Temperture Range
Operating Humidity
Display
50%-115% for HID mode / 20%-100% for LED mode
120 Units
60 Units
180 Meters
20mA
11.5V HID / 10V LED
5 V DC (1000 mA Minimum)
70°F-120°F
< 90%
LCD Touch
Output Specifications
SKU:
ILUM-CTRL-TC+
LED + CMH + HPS All From One Controller
Up to 120 Units, 60 fixtures per zone
Control 2 Independant Rooms
Sunrise / Sunset Effects
Battery Backup to Save Data
Dual Temperature Zone input for High Heat Dimming
Dual Temperature Probe Inputs
Touch Screen Technology
Pre-Install Information ...............................................................
Technical & Physical Specifications..............................................
Hardware & Accessories ...........................................................
Connection Instructions ............................................................
Operating instructions ..............................................................
Hanging Instructions ................................................................
Connecting the temperature sensor ............................................
Troubleshooting & Warranty .....................................................
2
3
4
5
7
10
11
12
CONTENTS
The Touch+ Controller is designed to control two light groups in any given area. The controller uses
0-10V adjustable DC voltage to control ballast & LED. The controller operates on a 24-hour time
cycle. The controller also has the ability to simulate sunrise and sunset cycle from
10-60 minutes. Each of the two-lighting group channels has a room overheat protection function that
can be set as needed. You can use the LCD touchscreen to easily view and modify the current settings
for each channel. The screen will automatically turn off after 45 seconds of no use to protect plants
from interruption of the light cycle. Moreover, the Touch+ Controller is portable, easily operated and
installed.
2
1-877-540-5588
iluminarlighting.com
© Copyright 2021, ILUMINAR Lighting
Subject to change without notice.
