3
3
1
2
2
2
RJ14
RJ14
RJ14
RJ14
RJ9
RJ9-RJ14
Include it
RJ14-RJ14
SKU: IL-CB-RJ1414
RJ14 Splitter
SKU: IL-ADPT-SPLIT
If multiple ballasts are used plug the RJ14
end of the same controller cable into the first
splitter. From the splitter plug one of the RJ14
cables into the first ballast, plug the other RJ14
cable into the next splitter. Continue this pattern
with up to 60 ballasts per channel.
3
1
2
3
Booting
Wait for 2 seconds or touch the screen and the
monitoring interface will turn on.
Note: The LED lighting controller uses a touchscreen interface. Use a finger or stylus to change
parameters, but be careful not to damage display.
Control Mode Page
Allows for your selection on HID or LED mode.
Monitoring
Only for monitoring. Parameters cannot be set.
A. Lighting Controller mode
B. Group 1 and Group 2
C. The current output watts (0 or 50~115% for the Ballast)/(0 or 20~100%
for the LED) Display will show real-time temperature (° F), updated every
2 seconds. When the sensor is pulled out, it will display “--- ° F ”.
D. The Limited Temp (can be set)
E. Manual/Auto Cycle with time setting
F. Current Time
G. Touch SETTING button to enter Setting menu, to change parameters
1
2
3
OPERATING INSTRUCTIONS
6
1-877-540-5588
iluminarlighting.com
© Copyright 2021, ILUMINAR Lighting
Subject to change without notice.
7
