11
MATRIX MANUAL 2014
I l l u s i o n - A u s t r a l i a n M a d e G a s L o g F i r e s
1.
Fit rear log onto the 2 pins at the rear of the grate as shown.
2.
Fit the centre log onto the pins in the middle of the grate as shown.
3.
Fit the left hand side front log onto the pins in the front of the grate as shown.
4.
Fit the right hand side front log onto the pins at the front of the grate as shown.
The right side front log overlaps the left hand side front log.
5.
Fit the right hand side top log onto the pins in the rear log and front rhs log as shown.
6.
Fit the centre “Y” shaped log “A” (GFX-L AND GFX-M), or curved log “B”
(GFX- S) onto the pins in the rear log and middle log as shown.
7.
Fit the left hand side top log onto the pins in the rear log and front lhs log as shown.
CHECK THE LOCATION OF ALL THE LOGS TO ENURE THEY ARE SEATED
FIRMLY BEFORE USING THE APPLIANCE. INCORRECT LOCATION OF
THE LOGS MAY CAUSE SOOTING AND POOR PERFORMANCE.
FITTING THE LOGS
WHEN INSTALLING LOGS, ENSURE THAT BURNER HOLES ARE NOT BLOCKED.
Obsructing
any of the burner holes may result in poor performance and can cause sooting to occur.
CAUTION: LOGS ARE FRAGILE. PLEASE TAKE CARE WHEN INSTALLING
FITTING THE LOG SET - MODELS GFX-L, GFX-M, GFX-S
WARNING: DO NOT USE LOGS OTHER THAN THOSE SUPPLIED BY THE
MANUFACTURER OR A HAZARDOUS SITUATION MAY RESULT.
1
2
3
4
5
THE COMPLETED LARGE OR MEDIUM LOG SET
(GFX-L & GFX-M)
6
THE COMPLETED SMALL LOG SET
(GFX-S)
7
A
B
