16
Signal settings
/Output
F
CODE RATE
: configures the redundant code rate by selecting from the values 1/2,
2/3, 3/4, 5/6 and 7/8.
F
ATTENUATION
: configures the attenuation for the radio frequency carrier signal
to the output using a sliding bar to vary this value within the range of 0 dB to 47 dB.
F
MAX BIT RATE:
reports the maximum binary data speed in the output of the unit.
F
NULL PERCENTAGE
: reports on the percentage of binary data in the output
without information.
F
MINIMUM C/N (THEORETICAL
): reports the minimum theoretical carrier to
noise ratio in the output.
F
TEMPERATURE
: displays the operating temperature in the unit.
2)
Select the option
ADVANCED PARAMETERS
activating the box in the upper left part of the
screen to view the advanced parameters of the
output signal of the unit.
J
ADVANCED PARAMETERS:
F
I-Q FORMAT
: configures the format of the I
and Q digital signals that will be modulated.
F
OFDM WINDOW
: allows you to activate and configure the OFDM window using a
sliding bar and an OFF button.
F
CELL ID
: configures the cell identification value using a sliding bar or inserting a
value directly in the field on the right of the bar that is greater than 0.
F
MPE FEC DVB-H
: allows you to activate and deactivate multiprotocol encapsula-
tion with error correction without return channel for DVB-H signal.
F
TIMESLICING DVB-H
: allows you to activate and deactivate the transmission
in shared time for a greater consumption efficiency in the transmission of DVB-H
signals.
F
DVB-H INTERLACING
: allows you to activate and deactivate the interlacing in
the transmission of DVB-H signals.
Summary of Contents for AV-COFDM
