IKUSI AV-COFDM, User Manual

Page: 17 / 24

17
Status information
Status information
1)
Select the
STATUS
menu and then the
STATUS INFORMATION
submenu.
2) Select the
GENERAL
tab.
The
GENERAL
tab in
STATUS IN-
FORMATION
shows the input status,
the output status and other general unit
parameters (alarms, temperature and
services).
J
INPUT 1
and
INPUT 2
:
F
VIDEO
: informs whether there is
a valid video signal to the input.
F
AUDIO
: informs whether there is
a valid audio signal to the input.
F
COLOUR SYSTEM
: informs on the colour system to the input. This can be PAL,
NTSC or SECAM.
J
OUTPUT
:
F
OUTPUT STATUS
: displays on the status of the output.
F
MAXIMUM BITRATE
: displays the binary speed of the data to the output.
F
MINIMUM NULL
: displays the minimum percentage of binary data in the output
without information.
F
ACTUAL NULL
: displays the current percentage of binary data in the output
without information.
F
MAXIMUM NULL
: displays the maximum percentage of binary data in the output
without information.
J
GENERAL
:
F
HARDWARE ALARM
: informs whether any hardware alarms have been triggered.
F
TEMPERATURE ALARM
: informs whether any temperature alarms have been
triggered. This is activated if the unit exceeds the minimum or maximum tempera-
ture (from 0 to 45°C).
F
TEMPERATURE
: reports the current operating temperature of the unit.
F
SYNC MPEG ENCODER
: reports on the optimum running of the MPEG encoder
synchronisation.
F
SYNC SI
: informs of the optimum status of the synchronisation for SI.
F
SERVICES OVERFLOW
: informs whether there is a services overflow.
EN