9
General configuration
/Network
3)
To modify the date and time of the unit, click on the option
CONFIGURE DATE AND
TIME
in the lower part of the screen.
4)
Once finished configuring the data you can save it by clicking on
SAVE
in the lower
part of the screen.
Network
1)
Select the
GENERAL
menu and then the
CONFIGURATION
submenu.
2)
Select the
NETWORK
tab.
The
NETWORK
configuration tab establishes the
parameters for connecting the MAC 201 unit to the
Ethernet network.
J
MAC ADDRESS
: the unit automatically shows
its MAC address for connection to the network.
J
USE DHCP TO RESOLVE IP
: select this option
for the unit to obtain an IP address automatically
using the DHCP protocol. If you select this op-
tion it will not be necessary for you to configure
the following fields.
NOTE
If the administrator of the local area network assigns static IP network addresses,
never activate this option. Only activate this option if there is a local area network
switching unit capable of assigning dynamic IP addresses by DHCP protocol.
J
IP ADDRESS
: enter a static IP address within the valid range for the local area network
to which the unit is connected.
J
NETWORK MASK
: enter the local area network mask.
J
DEFAULT GATEWAY
: enter the IP address of the default gateway in the local network
to which the unit is connected.
Password
1)
Select the
GENERAL
menu and then the
CONFIGURATION
submenu.
2)
Select the
PASSWORD
tab.
The
PASSWORD
configuration tab enables you to
change the current password for access to the web
interface of the MAC 201 unit (see section
Connec-
tion to the web interface
).
J
OLD PASSWORD
: enter the current password.
J
NEW PASSWORD
: enter the new password.
EN
Summary of Contents for AV-COFDM
