Signal settings/Advanced Service Management
14
Signal settings
/Advanced Service Management
14
F
MIN. NULL
: displays the minimum percentage of binary data in the output that
does not contain information.
F
ACT. NULL
: displays the current percentage of binary data in the output that does
not contain information.
F
MAX. NULL
: displays the maximum percentage of binary data in the output that
does not contain information.
Advanced Service Management
1)
Select the
SETTINGS
menu and then the
SER-
VICE MANAGEMENT
submenu.
2)
Select the
ADVANCED MANAGEMENT
tab.
The
ADVANCED MANAGEMENT
tab lets you
configure the NIT table management (Network Iden-
tifier Table).
J
NETWORK NAME:
allows you to assign a
name to the network.
J
NID:
allows you to assign a value to the network
identifier.
J
TSID:
allows you to assign a value to the identi-
fication of the transport current or TS.
NOTE
For a header configuration with 2 or more units, the TSID value must be different
for each unit.
J
ONID
: allows you to assign a value to the origi-
nal network identifier.
J
PROVIDER:
allows you to specify the name of the service provider.
J
NIT MODE:
allows you to select the NIT mode.
F
OFF:
NIT is not inserted (the LCN values are ignored).
F
WITHOUT MODEL:
the NIT generated by the unit is inserted.
F
INTEGRATION WITH MODEL NIT:
the information generated by the unit is
integrated in a selected model NIT (see option
LOAD NEW FILE
in step 3 of this
chapter). If the TSID coincides, it replaces the information in the model NIT with
that of the unit.
NOTE
When the NIT is enabled, the channels are sorted according to the LCN value.
J
NIT LCN MODE:
Allows you to select the mode of the NIT LCN.
F
OFF
: the LCN descriptor is not inserted in the NIT
F
EUROPE MODE
: the descriptor for Europe is inserted.
Summary of Contents for AV-COFDM
