Ikra IBF 31-4, Translation Of The Original Instructions

Page: 32 / 128

30
ATTENTION
Hearing damage
A longer stay in the immediate vicinity of the running
unit may cause hearing damage. Wear ear protectors!
When working with the device, a certain level of noise
cannot be avoided. Noisy work should be scheduled for
hours, during which it is allowed by statute or other local
regulations. Adhere to any applicable rest times and limit
your working time to the necessary minimum time. For
your personal protection and the protection of people
nearby, suitable hearing protection must be worn.
Noise emission information in accordance with the
German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can
exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Please do also consider any local regulations concerning
noise protection!
WARNING
Risk of injury
Use only original cutting devices or ones homologated
by the Manufacturer.
• Only use the trimmer with the right trimming cord
installed and with both trimming cords being at the
right length.
• Do not use metal wire or plastic- sheathed metal wire
of any kind in the cutting head. This may lead to serious
injuries of the operator.
All protection covers and safety devices must be cor-
rectly attached to operate the device.
• The cutting diameter must not exceed the length of the
protection cover stated in this manual.
Before starting work please:
• check that all the screws on the machine and the cutting
device are tightly fastened
• check that the cutting device is undamaged
• and that the 3 or 4-point metal blades (if fitted) are
properly sharpened
• check that the air filter is clean
• check the handgrips are well fastened
• Before each use of the device, check whether the cutting
head is attached correctly and that the throttle lever
returns to zero position automatically.
• Check all screw and plug-in connections and protective
equipment if firm and tightened properly and whether
all moving parts are running smooth whenever the ap-
pliance is to be put into operation.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in conflict
with the designation and it is prohibited to attach any
protective equipment of other manufacturers.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and dam-
aged parts.
WARNING
The cutting device must not move when the engine is
running idle. If the cutting device moves when the engine
is running idle, contact your dealer to correctly regulate
the engine.
The machine must always be used connected to the web-
bing worn correctly. Frequently check the efficiency of the
quick release mechanism used to quickly free the machine
from the belts in case of danger.
The webbing must be put on before connecting the
machine to the special coupling and the belts must be
adjusted to suit the operator’s height and stature.
Never start the engine with the shoulder strap hang up.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to
persons or damage to the machine.
Make sure that the trimmer is not soiled by parts of plants
or other materials.
WARNING
Risk of injury
Rotating blades may lead to serious injuries by cutting
or amputating parts of the body.
• Be careful to avoid injury by the cutting tools. Careful
appliance handling reduces the risk of injury by knife.
• Always have your arms and legs in safe distance from
the cutting mechanism, in particular after turning the
engine on.
Never touch under the housing body when the engine is
running. Wear protective shoes.
• Avoid any inadvertent starting of the engine. Make sure,
that the control lever is always in ‘Start’ position when
you pull the starter rope.
• Never use the lawn trimmer without the protective
cover.
• After the appliance is turned off, the cutting head keep
rotating for a couple of seconds. Keep your arms and
legs in safe distance.
• Carry the lawn trimmer with the handle, with the blade
being off (idle).
Thrown-off stones or soil may lead to injuries.
• Before mowing, check the area to be mowed for any
undesirable objects.
• Wear safety goggles when working.
When working, the machine must always be firmly held
in both hands, keeping the power unit on the right of the
body and the cutting group below the line of the belt.
• Adjust the handle to your body height before starting
the device and make sure that the cutting head is not in
touch with any objects.
• Be careful when going backwards – risk of tripping!
GB ENGLISH