Ikra BVN 2200, Operating Instructions Manual

Page: 27 / 32

GB-5
Technical Specifications BVN 2200
Rated voltage V~ 230
Rated frequency Hz 50
Rated power consumption W 2200
Fuse (time lag) A 16
Rotation rpm 14.000
Max. blowing speed km/h 210
High blow volume m
3
/ min. 11
Bag volume l 45
Weigth kg 3,8
Protection class II/VDE 0700
The A-rated sound pressure level of the device measured in accordance with DIN 45635 Part1, Appendix D is:
Weighted sound pressure:
87 dB (A)
[K 3,0 dB(A)]
Vibration max. <3,96 m/s²
[K 1,5 m/s
2
]
These values were measured in accordance with the following standards: prEN 15503
This device has a radio interference suppression according to: EN 55014-1, EN55014-2
Please wear ear protectors!
Noise emission information in accordance with the German Equipment and Product Safety Act (GPSG) and the EC
Machine Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator
will require noise protection (e.g. wearing of ear protectors).
still won’t start have it inspected by an authorised
customer service firm.
• The machine won’t vacuum: Check whether the
leaf collection bag is full. If it is, empty it; check
whether the lever for the reversing flap is in the cor-
rect position, otherwise have the machine inspected
by an authorised customer service firm.
•
The machine won’t blow:
Check whether the lever
for the reversing flap is in the correct position, other-
wise have the machine inspected by an authorised
customer service firm.
• The shredder wheel is blocked: Check whether an
object has been sucked in that is too large; a piece
of wood, cardboard or other object has become
jammed between the impeller and shredder cham-
ber. If the shredder wheel remains blocked have
the machine inspected by an authorised customer
service firm.
• If the machine vibrates, please immediately stop us-
ing it. Have the machine inspected by an authorised
customer service firm.
Waste disposal and environmental protection
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.