3
PREPARATION
This product has been water pressure tested at the factory and is
depth rated to 200 ft (60m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the main housing o-ring and retest to make sure that the housing is
watertight. Refer to the Troubleshooting section, page 24.
Please read your camera manual thoroughly to have a full understanding of
each camera function.
If you are new to underwater photography, be sure to read the Photo Tips
section, page 23.
Table of Contents - continued
Lubricant ..................................................................................P. 17
Housing Maintenance ..............................................................P. 17 - 18
Control Maintenance ...............................................................P. 19 - 22
PHOTO TIPS ...........................................................................P. 23
TROUBLESHOOTING ............................................................P. 24 - 26
CUSTOMER SUPPORT ..........................................................P. 26
LIMITED WARRANTY ............................................................P. 30
RETURNING PRODUCTS FOR SERVICE .............................P. 31
