The Ikelite Housing features a Fiber Optic Port on the housing front. The
Port is designed to accept standard fiber optic cords.
1. Lightly lubricate the Sync Cord O-rings. Use ONLY Ikelite lubricant (supplied
with housing). Other lubricants may cause the o-rings to swell and seal
improperly.
2. Line up one of the cord ends with one of the open corresponding Fiber
Optic Ports. Insert and push Sync Cord into the port until it stops. Cord
End Base should be flush with Fiber Optic Port. Either Cord End may be
attached to a component.
3. Attach other end of the cord to your strobe.
Attach Ikelite Fiber Optic Cord to the Housing
14
Diagram E
Cord End Base
Fiber Optic Cord
