1. Insert a fully charged camera battery
2. Insert and properly format a memory card.
3. Set Rec.Mode to “Av” or “M.”
4. Set Image Review to “4 sec.”
5. Set AF operation to “ONE SHOT” and AF method to “1-point AF.”
6. Set Continuous AF and AF-assist beam to “Off.”
7. Set ISO to “200.”
8. Set Metering Mode to “Center Weighted Avg.”
9. In Flash Control: Set Flash firing to “On” and Red-eye reduc. to “Off.”
10. Set Power Saving - Auto Power Down to “Off.”
11. Set Time Zone, Date/Time.
12. Set White Balance to “AWB.”
Always use auto white balance (AWB) when
using a strobe/flash. When recording video, AWB can still be used, but
for more accurate and consistent colors we recommend setting “Custom
White Balance” .
- Camera settings not mentioned should be set to the user’s preference.
- Some settings may change based on your shooting environment.
7
HOUSING and CAMERA SETUP STEPS
Step 1 - Initial Camera Setup
