44
Basic setting of motion detection
No. Item
Description
Initial
setting
To set the motion detection function On/Off.
Off
Motion detection is not implemented.
①
Function
On
Motion detection is implemented.
Off
②
Sensitivity
※
1
To set the motion detection sensitivity. The higher
the sensitivity, the easier motion is detected, but
accordingly, it is more likely to detect
interference/noise etc.
10
③
Detect Interval
※
2
To set motion detection intervals by 1/60 second
units.
10
④
Alarm Decision
Count
※
3
To set the number of times of motion detection at
which to generate an alarm.
5
⑤
Minimum Size
(Width)
※
4
You can set the minimum size (width) for motion
detection.
16
⑥
Minimum Size
(Height)
※
4
You can set the minimum size (height) for motion
detection.
16
Masking the motion detection setting
You can set aside
an area not subject to motion detection
.
⑦
Masking No.
To select the masking number to set. A maximum
of 8 can be set for masking.
1
To set the motion detection function On/Off.
On
An area with masking setting is not
subject to motion detection.
⑧
Function
Off
The masking function is not set.
Off
⑨
Start Point X
※
5
Setting the origin of the coordinate in a lateral
direction of the masking area.
By clicking “-” and ”+”, the origin can be moved to
the right and left.
※
1
0
⑩
Start Point Y
※
5
To set the origin of the coordinates in a
longitudinal direction of the masking area.
By clicking “-” and ”+”, the origin can be moved
up and down.
※
1
0
⑪
Width
※
5
To set the width of the masking area
By clicking “-” and ”+”, the width can be adjusted.
※
1
16
⑫
Height
※
5
To set the height of the masking area
By clicking “-” and ”+”, the height can be
adjusted.
※
1
16
To set whether to reverse the masking area set.
Off
The area set is masked as an area free
from motion detection.
⑬
Reverse
※
6
On
The area set is subject to motion
detection, and the other portion is
masked as an area free from motion
detection.
Off
