18
No. Item
Description
Initial
setting
To set whether or not to authenticate the image
display.
Off
No authentication required for
the image display.
Within Network to which the
camera is connected, anyone
can view the image.
Basic
Authentication
※
1
Authentication is required for the
image display.
Password will not be encrypted.
①
RTSP
Authentication
Digest
Authentication
※
1
Authentication is required for the
image display.
Password will be encrypted.
Basic
Authentication
②
Multicast IP
Address (IPv4)
To set an IP address (IPv4) for multicast.
239.192.1.1
③
Multicast IP
Address (IPv6)
To set an IP address (IPv6) for multicast.
ff02::4
④
RTSP
Port
To set an RTSP port.
We recommend setting a value of 554.
554
⑤
Proxy
Port
To set a Proxy port.
We recommend setting a value of 8554.
8554
⑥
RTP and RTSP
over HTTP Port
To set a RTP and RTSP over HTTP port.
We recommend setting a value of 8180.
8180
⑦
Unicast
Port
To set a port for unicast distribution.
We recommend setting a value of 10000.
10000
⑧
Multicast
Port
To set a port for multicast distribution.
We recommend setting a value of 10100.
10100
⑨
TTL
To set TTL. A value from
0 to 255
can be entered.
2
⑩
Number of
Stream
※
2
To set the number of streams this equipment
distributes.
1
⑪
Click when you would like to return to the value
when the screen is displayed.
⑫
Click when you have changed the setting.
※
1.
Authentication is conducted by inputting the login name and password of administrator
from decoder or viewer. For the input method, please check the manual of the decoder
or the viewer you are using.
※
2.
When you use a SD card memory, it is required to set the number of streams more than
2.
4.
When you finish changing a setting value, click
at the bottom of the
screen.
The confirmation dialogue box shows up.
Click
if you want to go back to the value when started.
5.
If you want to keep it, click
to save.
If you click
, setting will not be saved.
With that, we come to the end of changing the RTSP settings.
5
