Ikegami FA-97A, Operation Manual

Page: 81 / 166

65
HDK-99 1803 VER1 (E)
4
O
P
E
R
AT
IO
N
4.6 Auto Setup
4.6 Auto Setup
The camera is equipped with the auto setup function that automatically adjusts various levels and settings in the CPU of the
camera.
●
FULL auto setup
Executes all auto setup items and initializes the camera. This is mainly executed at the time of maintenance and inspection.
●
LEVEL auto setup
Sets the image level. This is executed daily when you use the camera.
●
FULL QUICK auto setup or QUICK auto setup
Because the FULL QUICK auto setup uses the electrical signal built in the camera, you do not need an external chart. The setup is
possible even when you cannot shoot a chart.
Because the QUICK auto setup uses test pulses, the setup does not include adjustments of a gap in the circuit, CCD, lens, etc.
which was present before the test pulses are mixed
●
Auto White Balance (AWB)
Sets the white level of the R, G and B signals. White balance needs to be readjusted when the color temperature of the light source
changes or optical filters are changed because white balance is affected by the color temperature of the light source and by optical
filters.
●
Auto Black Balance (ABB)
Sets the black level of the R, G and B signals. Though black balance is affected neither by the color temperature of the light source
nor by optical filters, it needs to be readjusted when GAIN is changed or the ambient temperature has changed significantly.
Note:
Auto setup converges on the reference file value. The convergence value for FULL auto setup can be selected between Internal
Reference (INT) and External Reference (EXT). This reference file value is created in the memory at shipment. The reference file
needs to be created again if you want to change the value.
Auto setup can be activated from the camera, OCP, and MCP. See the table in the next page for which device can activate which
auto setup function.
Reference:
For how to execute auto setup from the OCP/MCP, refer to the relevant operation manual.