Ikegami FA-97A, Operation Manual

Page: 116 / 166

100
HDK-99 1803 VER1 (E)
5.2 Settings from the Menu
3
On MENU (3/4), turn the rotary pulse switch to
position the cursor on "LENS SELECT," and press
the SET button.
The submenu is displayed.
4
Set "NUMBER", "NAME" and "EXTENDER".
Refer to the explanation of corresponding item for how
to set each data.
NO. 1 is selected here as an example.
CAUTION:
If a new file is created with the same file number as an
existing file, the data will be overwritten and the old
data will be lost.
5
Turn the rotary pulse switch to position the cursor
on "FILE SET," and press the SET button.
The cursor moves to the mode selection column.
6
Turn the rotary pulse switch to select the set value,
and press the SET button.
The value is confirmed, and either of the following
messages is displayed at the bottom of the screen:
- LENS No. x : Displayed when "MANUAL"
is selected.
- PUSH SET -> START : Displayed and flashes when
"AUTO" is selected.
Go to Step 7 when "AUTO" is selected.
When "MANUAL" is selected, go to Step M1 (P101)
to obtain the model name of the lens after lens file
items such as GAIN/FLARE/GAMMA are adjusted by
MCP, etc.
7
Press the SET button.
The lens file is created.
8
Set the S3-4 DIP switch of the MPU_MULTI_B module back to "OFF."
Note:
- When the camera is powered OFF, the FILE SET settings are turned OFF.
- Before creating lens files, prepare all the lenses to use. Then, create the files under the same condition at a time. If the conditions are
changed, the setting cannot be accurate. Lens files memorize a difference in level between lenses. If the lighting or chart is changed,
the camera cannot tell whether it is a lighting, chart, or lens difference.
ＳＣＡＮ ＦＯＲＭＡＴ ＳＥＬＥＣＴ
ＣＰＵ ＳＹＳＴＥＭ ＣＯＮＴＲＯＬ
ＡＵＴＯ ＩＲＩＳ ＳＥＴ
ＡＷＢ／ＡＢＢ ＭＯＤＥ
ＬＥＮＳ ＳＥＬＥＣＴ
ＬＥＶＥＬ ＡＤＪＵＳＴ
ＰＲＯＣＥＳＳ ＭＯＤＥ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
ＭＥＮＵ ＭＯＤＥ
＊＊＊ ＭＥＮＵ （３／４） ＊＊＊
▲
▲
▲
③
Position the flashing
cursor on "LENS
SELECT" and confirm.
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＮＯ．１
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
▲
⑤
Position the cursor on
"FILE SET" and
confirm.
⑥
Select the set value
and confirm.
⑦
Either message is
displayed or flashes.