Ikegami FA-97A, Operation Manual

Page: 118 / 166

102
HDK-99 1803 VER1 (E)
5.2 Settings from the Menu
Note:
- When the new model name cannot be loaded from the
lens, "READ ERROR" appears on the bottom instead
of "COMPLETED."
- When the rotary pulse switch is turned to switch the
cursor on "CANCEL" to "CLR" and the SET button is
pressed in Step M2, "COMPLETED" appears on the
bottom.
Next, when "COMPLETED" disappears, the area to
display a model name automatically obtained from the
lens will be blank.
Note:
The lens name used for "AUTO SEL" can be edited so that the lens file can be shared with a similar lens.
The following explains the procedures.
E1
Follow Steps 1 to 3 of lens file creation to display the submenu.
E2
Turn the rotary pulse switch to position the cursor
on "NUMBER", and press the SET button.
The registered lens numbers (NO. 1 to NO. 8) are
displayed.
E3
Turn the rotary pulse switch to position the cursor
on the lens number of the file name to be edited,
and press the SET button.
The NO.5 lens set in "AUTO SEL" is selected here as
an example and the AUTO SEL NAME display part
displays "AB40X10 ABCD".
▲
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＡＵＴＯ ＲＥＡＤ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＲＥＡＤ ＥＲＲＯＲ
When the new model
name cannot be
loaded
▲
▲
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＣＬＲ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
ＭＯＤＥＬ ＡＵＴＯ ＲＥＡＤ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
ＣＯＭＰＬＥＴＥＤ
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
（ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＬＥＮＳ ＮＯ．１
Switch the cursor to
"CLR" and confirm.
"COMPLETED"
appears.
The area will be blank.
▲
ＮＵＭＢＥＲ ＯＦＦ
ＮＡＭＥ （ ）
（ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
E②
Position the cursor on
"NUMBER" and confirm.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
E③
Select the target lens
number and confirm.