Ikegami FA-97A, Operation Manual, Page: 39 / 166

2
N
A
M
E a
nd F
U
N
C
T
IO
N
23
HDK-99 1803 VER1 (E)
2.1 Camera and Viewfinder
⑬
HD SDI OUT connector
Outputs the HD-SDI signal to an external system. It can be used as the main line signal
connector when the camera is self-contained and it can be used as the MON OUT connector
when the camera is connected to the CCU.
⑭
REMOTE connector
Connects a remote control panel (OCP, MCP, or RCP) to send or receive various control
signals when the camera is self-contained.
⑮
DC IN connector
Connects an AC adapter to 12V DC power to the camera.
⑯
System expansion connector
Connect the camera and the system expansion device of the SE-H700/SE-H750.
⑰
MIC-2 connector
Connects a microphone or input audio signal of line level.
⑱
MIC-1 connector
Connects a microphone or input audio signal of line level.
⑲
MIC-2 POWER switch
Selects the type of power supplied to the microphone connected to the MIC-2 connection.
The settings depend on the type of microphone used.
+12V : Su12V AB power
OFF : Supplies no power. Applicable for a dynamic microphone or a microphone with
built-in battery which requires no power supply
+48V : Su48V Phantom power
○
20
MIC-1 POWER switch
Selects the type of power supplied to the microphone connected to the MIC-1 connection.
The settings depend on the type of microphone used. Its settings are identical to the MIC-2
POWER switch.
○
21
DC OUT connector
DC 12V (0.5A) standard output connector for miscellaneous use (for example, a wireless
mic receiver).
○
22
Q-TV/GL, MON OUT connector
Outputs the signal selected by the Q-TV/GL, MON OUT SELECT switch.
●
When set to Q-TV/GL
Select the Q-TV and VBS signals from the camera menu screen. Outputs the analog
video signal which is input to the Q-TV connector on the rear of the CCU. The Q-TV
video signal output function is available only when the camera is connected to the CCU.
Inputs a PS/S signal (tri-level sync) as external synchronization signal input (GENLOCK
input). The external synchronization signal input is only available for the self-contained
camera.
●
When set to MON OUT
Outputs an analog monitor signal. Select the MON, SYNC signals from the camera menu
screen.
○
23
Q-TV/GL, MON OUT SELECT switch
Selects the type of signal which is output from the Q-TV/GL, MON OUT connector.