Ikegami FA-97A, Operation Manual, Page: 130 / 166

114
HDK-99 1803 VER1 (E)
6.2 "TEMP!!" or "FAN!!" Appears on the VF Screen
6.2 "TEMP!!" or "FAN!!" Appears on the VF Screen
When the temperature inside the camera increases abnormally, a warning indicating an abnormal temperature rise flashes on the
viewfinder screen.
ＴＥＭＰ!!
Status Cause Action
TEMP!! flashing
The camera is exposed to direct sunlight for
many hours. Put a sunshade cover on the camera to avoid
direct sunlight.
The camera is used near some heating appliance. Move the position of the camera or heating appliance.
If a fan stops due to some failure, a warning indicating an irregular fan stop flashes on the viewfinder screen.
ＦＡＮ!!
Status Cause Action
FAN!! flashing Fan stops. Inspect the fan for any problem.
Note:
To prevent temperature increase inside the camera, cooling fans are provided at the top of the camera and fiber adaptor.
For how to check which fan stops, refer to
"5. CAMERA SETTINGS and ADJUSTMENT : Menu Configuration and content"
(P85) .