Ikegami Electronics HEM-1770WR, Operation Manual, Page: 77 / 88

- 67 -
(2) Marker function
a) Center marker
(Set to ON/OFF using MENU settings)
b) Safety marker
Any of the following markers is displayed
according to the image aspect ratio (4:3/16:9).
The numbers in parentheses show the aspect
at the time of marker display.
<Types>
࣭
“Safety area marker” + 100% (4:3/16:9)
The “safety area markers” are effective
over the entire screen and can be preset
1% by 1% in the range of 80-99%.
࣭
5 divided crosshatch (4:3/16:9)
࣭
10 divided crosshatch (4:3/16:9)
࣭
Cross (4:3/16:9)
࣭
16:9 aspect marker (4:3)
࣭
15:9 aspect marker (4:3/16:9)
࣭
14:9 aspect marker (4:3/16:9)
࣭
13:9 aspect marker (4:3/16:9)
࣭
4:3 aspect marker (16:9)
࣭
1.85:1 aspect marker (16:9)
࣭
2.35:1 aspect marker (16:9)
࣭
“Each aspect marker” + “Safety marker
in aspect” (4:3/16:9)
The “safety marker in aspect” refers to
the safety marker with respect to the
aspect marker display zone, and can be
preset 1% by 1% in the range of 80-99%.
Corresponding to each aspect marker.
<Marker level>
࣭
Set in five steps of 20%, 40%, 60%, 80%
and100%
(3) Shadow function
Creates a shadow outside the aspect areas with 4:3
(16:9 mode), 13:9, 14:9, 15:9, 16:9 (4.3 mode),
1.85:1 (16:9 mode) and 2.35:1 (16:9 mode).
<Types>
࣭
“Various aspect markers” + “Shadow”
࣭
“Various aspect markers” + “Safety marker in
aspect” + “Shadow”
࣭
Shadow only
<Shadow contrast level>
࣭
Set in four steps of 0%, 20%, 40% and
60%.
(4) User marker function
Function for the user to draw their desired lines and
boxes in the unit of pixels.
a) No. of types: 100 types: 10 scenes x 10 types
(1 scene: 10 types)
b) No. of colors: 6
c) Drawable sizes: 1920 x 1080 pixels
d) Drawing method: Switch or USB mouse
* Patent pending
(5) USB memory function
a) Content of the memory
࣭
MENU setting
࣭
User marker
࣭
PRESET data
࣭
Full capture image
b) Stored image
࣭
No. of stored images: Max. 100 images
࣭
Resolution: 1920
™
1080
࣭
File format: Binary file for exclusive
use of the monitor
࣭
Data capacity: 7 Mbyte
7-5 㸬 Remote Control
(1) Parallel remote control
Input connector: HD D-SUB 15-pin
࣭
CH A/B switching
࣭
SDI ON/OFF
࣭
COMPONENT ON/OFF
࣭
DVI-D ON/OFF
࣭
ANALOG PC ON/OFF (
ۻ
)
࣭
COLOR/MONO switching
࣭
YPbPr/RGB switching
࣭
4:3/16:9 switching
࣭
SYNC INT/EXT switching
࣭
MARKER ON/OFF
࣭
SHADOW ON/OFF
࣭
R TALLY ON/OFF
࣭
G TALLY ON/OFF
࣭
CROMA UP ON/OFF
࣭
SHADOW0 ON/OFF (
ۻ
)
࣭
SHADOW20 ON/OFF (
ۻ
)
࣭
SHADOW40 ON/OFF (
ۻ
)
࣭
SHADOW60 ON/OFF (
ۻ
)
࣭
USER MARKER SCENE* ON/OFF (
ۻ
)
* : 1
㹼
10
* For the pin function, refer to ""Data 2 Par-
allel Remote Pin Function".
* In addition to default setting, user setting is
possible.
The “
ۻ
” marked settings are used in the
USER mode.
(2) RS485 remote control
(The controller SRC-400 is optional.)
a) Connector: RJ-45 (loop-through)
b) Maximum number of connections: 32 units
Extension by increasing the number of lines
is possible.
(3) Wireless remote control
[Controller RCT-30A is optional]
* See "Reference 4: Control with remote con-
troller" for the control items.”