Ikegami Electronics HEM-1770WR, Operation Manual, Page: 42 / 88

- - 32
մ
Scan size (NORMAL/UNDER) setting
࣭
Switches the image display sizes between NOR-
MAL SCAN and UNDER SCAN.
㸺
16:9NORMAL SCAN
㸼 㸺
16:9UNDER SCAN
㸼
㻌
100% display 95% of NORMAL SCAN
㸺
4:3NORMAL SCAN
㸼 㸺
4:3UNDER SCAN
㸼
࣭
Default setting is NORMAL.
յ
Setting the flickerless function ON/OFF
࣭
When it is used in a PC mode or the still picture
is monitored, the flicker can be reduced by
turning on the flickerless function to make it
double speed display.
* The line may appear double for videos.
࣭
Default setting is OFF.
ն
Adjusting the horizontal screen position
࣭
Adjust the horizontal screen position of VIDEO
input (SDI, VBS).
࣭
The settings are memorized for each channel,
each format, SYNC INT/EXT.
* In this setting, the values will not be stored due
to the "POWER ON STATUS” function.
࣭
Default setting is 0.
շ
Adjusting the vertical screen position
࣭
Adjust the vertical screen position of VIDEO
input (SDI, VBS, COMPONENT).
࣭
The settings are memorized for each channel,
each format, SYNC INT/EXT.
࣭
Default setting is 0.
ո Setting the contrast range
࣭
NORMAL
㸸
Set the video level within the range
with no over-flow even if the con-
trast level is MAX.
࣭
WIDE
㸸
The contrast level can be increased
to two times.
*The high level video has the
over-flow.
࣭
Default setting is NORMAL.